Back to project checks

Code sources and implementation coverage

183 downloaded chapter PDFs; 1492 distinct section references found in their text. Each snapshot is hashed for change detection and reproducibility.

Downloaded, indexed, interpreted and executable are different states. This index includes cross-references, tables of contents and repealed sections. It is not a complete requirement inventory, a current-law determination, or a percentage of automated review.

Sources supporting the current checks

Oregon residential code adoption

2026 transition; 2023 construction provisions available through phase-in

SHA-256: 74960b96b497555e98d192e7667b208c1348682a711a24b4803c113b64db628a

2026 Oregon electrical amendments

Table 1-E; effective October 1, 2026; base NEC remains separately required

SHA-256: 9fb530b4a48775dba4eb5512e5dafd7492e4cc1ea52f97c5791bd9dcbd025774

2025 OMSC published errata

2025 edition; reviewed 2026-11-01

SHA-256: 13b84702b70d6348a9cb1aa5139de989ce58628e82ee4f1448d91cd84a2f341e

Executable technical requirement inventory

130 executable checks; 29 explicit dependencies still missing. These are scoped checklist/guidance checks, not complete specialty-code coverage.

Download the machine-readable rule inventory
Supporting structure type — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: manufacturedDwelling (none), conventionalLightFrame (none)

Site loads and installation instructions — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: siteGravityWindDesignDocumented (none), manufacturerInstallationDocumented (none)

Snow and exposure eligibility — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: groundSnowPsf (psf), windExposure (none)

Framing type and spacing — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: framingType (none), framingSpacingIn (in)

Rafter geometry and species dependencies — missing

R324.4.1 Exception 1.4–1.6: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: framingType (none)

Referenced rafter provisions require the adopted full-code text and span/grade geometry. The checklist alone cannot verify this dependency.

Roof material and layer limit — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: roofCover (none), roofLayers (count)

Combined module and rack dead load — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: arrayDeadLoadPsf (psf)

Maximum module-to-roof height — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: moduleTopAboveRoofIn (in)

Module support configuration — executable

Figures R324.4.1(2)–(3): Documented support configuration only. Rafter/truss capacity, blocking design and manufacturer-specific fastener capacities remain separate dependencies.

Inputs: attachmentMethod (none), continuousSupportRail (none), prefabricatedStandoff (none), supportedOnRafterTrussOrBlocking (none)

Direct-framing attachment spacing — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: attachmentMethod (none), directToFramingOrBlocking (none), attachmentMaxSpacingIn (in), groundSnowPsf (psf), attachmentEdgeDistanceFt (ft), basicWindMph (mph), windExposure (none)

Standing-seam clamp capacity and spacing — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: attachmentMethod (none), directToStandingSeam (none), clampAlongSeamIn (in), clampMinimumAlongSeamIn (in), clampAcrossSeamIn (in), clampAllowableUpliftLb (lb)

Standing-seam substrate and fastening — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: attachmentMethod (none), panelMaterial (none), panelGauge (gauge), panelWidthIn (in), screwNumber (count), screwSpacingIn (in), sheathingNominalIn (in), woodStructuralPanel (none), sheathing8dNails (none), sheathingEdgeNailingIn (in), sheathingFieldNailingIn (in)

Supported attachment method — executable

440-5952 Part III: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: attachmentMethod (none)

Array layout and firefighter pathways — missing

440-5952 Part V; R324.6: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: None implemented

Selected access dimensions are implemented. Complete roof geometry, all edges/ridges/openings and the connectivity of every required pathway still need independent plan reconciliation.

Separate photovoltaic electrical review — missing

440-5952 introductory scope: Residential rooftop PV structural prescriptive checklist only; no electrical, fire-pathway or complete structural approval.

Inputs: None implemented

Circuit, conductor, equipment listing, grounding/bonding, disconnect and interconnection checks require the adopted electrical code and equipment data.

Solar raceway roof-slope interpretation — executable

R324.6.8.4.2: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: roofSlopeRatio (ratio), racewayInPathway (none)

Solar installation preserves egress and roof functions — executable

R324.6.3–5, 7: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: egressUnrestricted (none), lightVentilationUnrestricted (none), roofFeaturesFunctional (none), roofDrainageUnobstructed (none)

Solar clearance around serviceable mechanical equipment — executable

R324.6.6: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: serviceableRoofEquipment (none), equipmentClearanceIn (in)

Solar supports and penetrations clear roof valleys — executable

R324.6.7: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: roofValleyPresent (none), supportValleyDistanceIn (in)

Ordinary solar roof access pathways — executable

R324.6.8.1: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: solarAccessPath (none), roofSlopeRatio (ratio), pathwaySideCount (count), pathwayMinimumWidthIn (in), pathwaysStructurallySupported (none), bottomEdgeUsedAsPathway (none)

Small-array solar access eligibility — executable

R324.6.8.1 exception 1: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: solarAccessPath (none), arrayPlanAreaSqFt (sq_ft), totalRoofPlanAreaSqFt (sq_ft), maximumArrayDimensionFt (ft), roofSlopeRatio (ratio), intersectingAdjacentRoofPlane (none)

Small-array ridge and ridge-to-eave pathways — executable

R324.6.8.1 exceptions 1.1–1.2: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: solarAccessPath (none), arrayPlanAreaSqFt (sq_ft), totalRoofPlanAreaSqFt (sq_ft), ridgeEachSideClearIn (in), ridgeToEaveWidthIn (in), ridgeToEaveStructurallySupported (none)

Nonhabitable accessory solar pathway exception — executable

R324.6.8.1 exception 2: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: solarAccessPath (none), nonhabitableAccessoryStructure (none), habitableSeparationIn (in), separatingAssemblyHours (none)

Townhouse grouping or alternative solar access determination — missing

R324.6.8.1 exception 3 / R324.6.9: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: solarAccessPath (none)

Townhouse fire-separation history and permission to treat buildings as one structure, or an approved alternative design, require an authoritative project determination.

Intermediate solar pathways and cutout spacing — executable

R324.6.8.2–2.1: 2023 ORSC Oregon solar amendments, reviewed November 4, 2026. Supplied roof geometry, feature inventory and product details require verification; selected checks do not establish full structural or fire access compliance.

Inputs: maximumArrayDimensionFt (ft), arrayPlanAreaSqFt (sq_ft), maximumUnbrokenArrayDimensionFt (ft), maximumUnbrokenArrayAreaSqFt (sq_ft), intermediatePathWidthIn (in), maximumDistanceToCutoutFt (ft)

Solar pathway valley and electrical obstructions — executable

R324.6.8.3–4: Raceway exception is implemented only for flat roofs; positive slopes at or below 2:12 need a separate interpretation rather than assuming they are flat.

Inputs: solarAccessPath (none), roofValleyPresent (none), pathwayValleyDistanceIn (in), boxesOutsidePathways (none), racewayInPathway (none), roofSlopeRatio (ratio), crossingRacewayBridged (none)

Stair path selection — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none)

Clear width above rails — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), widthAboveRailsIn (in)

Headroom measured above nosing line — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), headroomIn (in)

Riser dimensions and consistency — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), riserMinIn (in), riserMaxIn (in)

Tread depths and consistency — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), treadMinIn (in), treadMaxIn (in)

Nosing projection — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), nosingMinIn (in), nosingMaxIn (in)

Handrail presence, height and continuity — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), riserCount (count), handrailPresent (none), handrailMinHeightIn (in), handrailMaxHeightIn (in), handrailWallClearanceIn (in), handrailProjectionIn (in), handrailContinuous (none), handrailReturns (none)

Handrail graspability — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), riserCount (count), gripType (none), gripDiameterIn (in), gripPerimeterIn (in), gripCrossSectionIn (in)

Open stair guard height and openings — executable

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none), maximumDropWithin36In (in), stairGuardPresent (none), stairGuardHeightIn (in), stairGuardOpeningIn (in), stairTriangleOpeningIn (in)

Landings, door swings and structural attachment — missing

Portland residential stair guidance: New straight residential stairs; special configurations and existing stair exceptions are separate.

Inputs: stairPath (none)

Landing/door geometry, flight rise limits, structural connections, accessibility and exceptions require additional adopted provisions and project geometry.

Opening measurements and supported path — executable

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: windowPath (none), measurementBasis (none)

Opening width, height and area — executable

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: windowPath (none), clearWidthIn (in), clearHeightIn (in), clearAreaSqFt (sq_ft)

Height of clear opening above floor — executable

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: sillAboveFloorIn (in)

Operation from inside — executable

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: opensFromInside (none), requiresKey (none), requiresTool (none), requiresSpecialKnowledge (none)

Window well clear space — executable

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: sillBelowGround (none), wellClearWidthIn (in), wellClearProjectionIn (in), windowFullyOpensInWell (none)

Deep well access — executable

Portland residential windows: emergency escape: Ladder path only. A step design outside this check needs separate assessment.

Inputs: sillBelowGround (none), wellDepthIn (in), wellAccessType (none), wellLadderPermanent (none), wellLadderRungWidthIn (in), wellLadderRungSpacingIn (in), wellLadderWallClearanceIn (in), wellLadderProjectionIn (in), wellLadderFullHeight (none), wellAccessObstructsWindow (none)

Well cover removal and opening — executable

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: sillBelowGround (none), wellCoverPresent (none), wellCoverRemovableInside (none), wellCoverClearAreaSqFt (sq_ft)

Discharge, obstructions and fall protection — missing

Portland residential windows: emergency escape: New residential escape windows; no historical or alteration exceptions.

Inputs: None implemented

R310 discharge paths, opening-control devices, fall protection and historical exceptions are not settled by aperture measurements.

Spiral stair dimensions — executable

Portland residential stair guidance: Published spiral dimensions only; other stair, guard and egress requirements remain unverified.

Inputs: stairPath (none), spiralWidthIn (in), headroomIn (in), spiralTreadAt12In (in), riserMaxIn (in), spiralTreadsIdentical (none)

Winder tread geometry — executable

Portland residential stair guidance: Winder tread and consistency checks only; other stair, guard and egress requirements remain unverified.

Inputs: stairPath (none), winderNarrowestIn (in), winderWalklineMinIn (in), winderWalklineMaxIn (in), riserMinIn (in), riserMaxIn (in)

Adjacent landing guard — executable

Portland residential stair guidance: Guard at an adjacent landing; landing geometry and structural capacity remain separate.

Inputs: stairPath (none), landingDropWithin36In (in), landingGuardPresent (none), landingGuardHeightIn (in), landingGuardOpeningIn (in)

Natural ventilation opening area — executable

Light and ventilation: Natural ventilation route only. Mechanical alternatives, daylight and other room requirements remain separate.

Inputs: spaceType (none), ventilationPath (none), roomFloorAreaSqFt (sq_ft), openableExteriorAreaSqFt (sq_ft), ventilationOpensOutside (none)

Sleeping loft path eligibility — executable

R332.1 / Appendix AQ notice: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: dwellingAreaSqFt (sq_ft), loftDepthFt (ft), loftAreaSqFt (sq_ft), permanentEgress (none), openToRoom (none)

Maximum loft floor area — executable

R332.2(1): 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAreaSqFt (sq_ft)

Area with ceiling above seven feet — executable

R332.2(2): 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAreaSqFt (sq_ft), loftAreaAboveSevenFtSqFt (sq_ft)

Loft and egress clear heights — executable

R332.3 / R332.5.1: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: clearHeightBelowFt (ft), loftMinimumHeightFt (ft), accessMinimumHeightFt (ft)

Sprinkler scope documentation — executable

R332.1.1: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: nfpa13dDesignDocumented (none), loftSprinklerCoverage (none), receivingRoomSprinklerCoverage (none)

Single-loft area exception — executable

R332.4 exception: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAreaSqFt (sq_ft), receivingRoomAreaSqFt (sq_ft), otherLoftsAndMezzanines (count)

Multiple-loft aggregate area — missing

R332.4 / R325.3: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: otherLoftsAndMezzanines (count)

R325.3 aggregate-area provisions and all compartment loft/mezzanine geometry must be reviewed; the single-loft exception does not apply.

Loft stair clear width — missing

R332.5.2.1: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAccess (none), loftStairAboveRailIn (in), loftStairBelowRailIn (in)

The published amendment pairs 20 inches with 610 mm for below-rail width; these are inconsistent. Obtain authoritative errata or interpretation before automatically determining this dimension.

Represented stair segment evidence — executable

R332.5.2.2: A single paired rise/tread value only represents a uniform segment. Nonuniform segments need individual measurements rather than a blanket failure.

Inputs: loftAccess (none), loftStairSegmentUniform (none)

Loft stair rise and tread formula — executable

R332.5.2.2: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAccess (none), loftRiserIn (in), loftTreadIn (in), loftStairSegmentUniform (none)

Loft stair landing depth — executable

R332.5.2.3: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAccess (none), loftLandingDepthIn (in)

Loft ladder dimensions and capacity — executable

R332.5.3.1–2: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAccess (none), loftRungWidthIn (in), loftRungSpacingMinIn (in), loftRungSpacingMaxIn (in), loftRungCapacityLb (lb), loftLadderAngleDegrees (degrees)

Full sprinkler and egress validation — missing

R332.1.1 / R332.5 / R311: 2023 ORSC R332 sleeping loft amendment only; small-home, complete R311 egress and NFPA 13D design are separate.

Inputs: loftAccess (none)

Actual NFPA 13D design/capacity, remaining R311 egress and landing requirements, and alternating-tread provisions require the referenced standards and full project evidence.

Working-space personnel door — executable

110.26(C)(3): Selected 2026 OESC amended provisions only. Listing authenticity, base NEC, design calculations and all equipment/door discovery remain separate.

Inputs: electricalOccupancy (none), equipmentAmps (amps), containsControlOrOvercurrent (none), doorServesWorkingSpace (none), doorDistanceFt (ft), doorOpeningDegrees (degrees), doorOpensWithEgress (none), exitHardware (none), hardwareUL305 (none), hardwareUL10C (none), doorLeafWidthIn (in), actuatingLengthIn (in), unlatchingForceLb (lb), balancedDoor (none), pushPadHardware (none), pushPadFromLatchIn (in)

Indoor working-space illumination — executable

110.26(D): Selected 2026 OESC amended provisions only. Listing authenticity, base NEC, design calculations and all equipment/door discovery remain separate.

Inputs: equipmentType (none), equipmentIndoors (none), workingSpaceAverageFootcandles (footcandles), allLightingAutomaticOnly (none)

Disconnect purpose and source marking — executable

110.22(A): Selected 2026 OESC amended provisions only. Listing authenticity, base NEC, design calculations and all equipment/door discovery remain separate.

Inputs: electricalOccupancy (none), isDisconnect (none), purposeEvident (none), purposeMarked (none), circuitSourceEvident (none), circuitSourceMarked (none), markingDurable (none)

Remaining electrical design and referenced standards — missing

2026 NEC / Oregon Table 1-E: Selected 2026 OESC amended provisions only. Listing authenticity, base NEC, design calculations and all equipment/door discovery remain separate.

Inputs: None implemented

The full base NEC, other amendments, equipment ratings, available fault current, circuit topology, protection, conductor sizing, grounding/bonding and product listing evidence are not validated by these selected checks.

Shower/body spray rating evidence at required pressure — executable

408.3: A flow rating at a different pressure does not establish the required 80 psi rating. Supply the correct product rating rather than infer a violation from an incomparable test.

Inputs: plumbingType (none), ratingPressurePsi (psi)

Showerhead rated flow at 80 psi — executable

408.3: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), ratedFlowGpm (gpm), ratingPressurePsi (psi)

Commercial pre-rinse flow and automatic shutoff — executable

420.3: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), ratedFlowGpm (gpm), sprayForceOz (oz_force), integralAutomaticShutoff (none)

Cleanout front clearance: pipe at most two inches — executable

707.9: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pipeDiameterIn (in), frontClearWidthIn (in), frontClearDepthIn (in)

Cleanout front clearance: pipe over two inches — executable

707.9: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pipeDiameterIn (in), frontClearWidthIn (in), frontClearDepthIn (in)

Underfloor cleanout access or extension — executable

707.9: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), underfloor (none), verticalAccessIn (in), horizontalAccessIn (in), extendedToFloorOrOutside (none)

Female plastic to male metallic threaded joint — executable

310.9: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), femalePlastic (none), parallelThread (none), maleMetallic (none)

Dielectric union referenced standard — executable

605.15: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), unionStandard (none)

Copper or stainless flexible connector length — executable

604.13: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), connectorMaterial (none), connectorLengthIn (in)

Flexible connector product standard — executable

604.13: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), flexibleConnector (none), connectorStandardDocumented (none)

Expansion tank secure fastening — executable

608.2 / 608.3: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), securelyFastened (none)

Expansion tank sizing and manufacturer requirements — missing

608.2 / 608.3: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none)

Tank sizing, listing and manufacturer-specific installation require additional source and project calculations; secure fastening alone does not establish compliance.

Backflow device for irrigation without pumping or chemicals — executable

603.5.6: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pumpingConnection (none), chemicalInjection (none), backflowDevice (none)

Chemical-injection irrigation protection — executable

603.5.6.3: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), chemicalInjection (none), backflowDevice (none)

Pumped irrigation device placement — missing

603.5.6.1–2: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pumpingConnection (none)

Device-choice checks now distinguish upstream backpressure and downstream potable pumps. Complete actual pump/device connectivity, installation clearances, listing and testing remain to be verified.

Dead-leg flushing access — executable

309.5: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pipeDiameterIn (in), deadLegLengthIn (in), accessibleFlushing (none)

Ordinary horizontal drain slope — executable

708.1: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), slopeInPerFt (in_per_ft), uniformTowardDisposal (none), reducedSlopeClaimed (none)

Reduced slope requires prior official approval — missing

708.1 exception: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), reducedSlopeClaimed (none)

The reduced-slope path requires impracticality, qualifying building-drain diameter, minimum slope and prior Building Official approval. A checkbox cannot grant that approval.

Small trap-arm turn without cleanout — executable

1002.3: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pipeDiameterIn (in), directionChangeDegrees (degrees), cleanoutProvided (none)

Larger trap-arm turn without cleanout — executable

1002.3 exception: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none), pipeDiameterIn (in), directionChangeDegrees (degrees), cleanoutProvided (none)

Trap-arm fitting and vent-system dependencies — missing

706.3 / 908–911: Selected 2026 OPSC provisions. Supplied product specifications and site facts require verification; this is not full plumbing design or installation approval.

Inputs: plumbingType (none)

Distance, load and turn checks do not establish fitting compliance or wet, circuit, combination or engineered vent-system eligibility. Those system paths require additional checks.

Trap load table size eligibility — executable

Table 702.1(1): 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in)

Horizontal-to-horizontal drainage fitting — executable

706.3: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), horizontalDirectionChange (none), horizontalFitting (none), equivalentSweepApprovalDocumented (none)

Backflow device upstream of backpressure source — executable

603.5.6.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), deviceUpstreamOfBackpressure (none), backflowDevice (none)

Backflow device downstream of potable supply pump — executable

603.5.6.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), deviceDownstreamOfPotablePump (none), backflowDevice (none)

Horizontal drainage table path — executable

Table 703.2 / 708.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), reducedSlopeClaimed (none)

Horizontal drain fixture-unit capacity — executable

Table 703.2 notes 1–5, 7: Ordinary quarter-inch-per-foot horizontal drainage, excluding trap arms and Appendix C alternatives. Public-lavatory aggregation must be reconciled under note 7 before entering DFU; reduced slope remains a separate approval path.

Inputs: plumbingType (none), pipeDiameterIn (in), connectedDfu (count), waterClosetCount (count), sixUnitTrapCount (count), restrictedSmallPipeFixtureCount (count)

Trap-arm table eligibility — executable

Table 1002.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), trapArmClass (none)

Trap-to-vent developed distance — executable

1002.2 / Table 1002.2 notes 1–3: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), trapArmClass (none), trapArmLengthIn (in), slopeInPerFt (in_per_ft)

Vent opening at or above trap weir — executable

1002.4 / 905.5: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), trapArmClass (none), ventOpeningAtOrAboveWeir (none)

Trap and trap-arm fixture-unit capacity — executable

Table 702.1(1): 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), connectedDfu (count), selfServiceLaundry (none)

Individual dry vent table path — executable

904.1–2 / Table 703.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), upsizedLengthExceptionClaimed (none)

Individual vent minimum diameter — executable

904.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), servedDrainDiameterIn (in)

Individual vent load and developed length — executable

904.1–2 / Table 703.2 notes 3, 6: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), connectedDfu (count), waterClosetCount (count), sixUnitTrapCount (count), ventLengthFt (ft), horizontalVentLengthFt (ft)

Vent drainage and absence of sags — executable

905.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), noDropsOrSags (none), drainsBackByGravity (none)

Horizontal drain vent takeoff — executable

905.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), horizontalDrainConnection (none), invertAboveDrainCenterline (none), downstreamOfTrap (none)

Vent rise before offset or joining — executable

905.3: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), structuralRiseExceptionClaimed (none), riseAboveFloodRimIn (in)

Structural vent-rise exception review — missing

905.3: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), structuralRiseExceptionClaimed (none)

Confirm actual structural obstruction and drainage-grade fittings/materials. The ordinary six-inch rule cannot decide this exception.

Roof vent termination height and surface clearance — executable

906.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), heightAboveRoofIn (in), verticalSurfaceDistanceIn (in)

Vent clearance from openings and air intakes — executable

906.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), nearestOpeningDistanceFt (ft), heightAboveOpeningsFt (ft)

Vent clearance from lot lines — executable

906.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), lotLineDistanceFt (ft)

Vent near roof used for assembly or parking — executable

906.3: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), usedRoofDistanceFt (ft), heightAboveUsedRoofFt (ft), securelyStayed (none)

Clothes-washer standpipe and trap elevations — executable

804.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), standpipeAboveWeirIn (in), trapAboveFloorIn (in)

Vertical drain fixture-unit capacity — executable

703.1–2 / Table 703.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), connectedDfu (count), waterClosetCount (count), sixUnitTrapCount (count), restrictedSmallPipeFixtureCount (count)

Vertical drain length table eligibility — executable

Table 703.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in)

Full vertical drain run length — executable

703.1–2 / Table 703.2: Table lengths for 1.25–8 inch vertical drains. Blank 10/12-inch length cells and offset-stack length interpretations remain unresolved; this is not a high-rise stack approval.

Inputs: plumbingType (none), pipeDiameterIn (in), verticalDrainLengthFt (ft)

Stack relief and offset-system review — missing

907.1–2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none)

A passing vertical capacity calculation does not establish story count, required parallel stack, yoke connections or offset-stack behavior. Supply the separately assessed stack-relief model and verify the complete system.

Connected dry-vent topology and rise — executable

901.2 / 905.1–5: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), dryVentConnectivityValid (none)

Unobstructed terminal aggregate vent area — executable

904.1: Area comparison cancels pi/4. Sewer requirement must be independently established. Shared terminals count once; upstream air-obstructing devices exclude the entire affected terminal from this conservative ordinary path.

Inputs: plumbingType (none), eligibleVentDiameterSquaredSum (none), requiredSewerDiameterSquared (none)

Individual fixture supply branch minimum — executable

Table 610.3 / 610.10: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), individualFixtureBranch (none), fixtureBranchMinimumKnown (none), requiredFixtureBranchIn (in), pipeDiameterIn (in)

Tall stack parallel vent requirement — executable

907.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), stackStoryCount (count), parallelVentPresent (none), parallelVentUndiminished (none), parallelVentLowestConnection (none)

Yoke vent minimum diameter — executable

907.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), yokeDiameterIn (in), stackDrainDiameterIn (in), stackVentDiameterIn (in)

Yoke connection height and fitting — executable

907.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), yokeConnectionAboveFloorIn (in), yokeDrainWyeBelowBranch (none)

Complete high-rise floor and yoke inventory — missing

907.1–2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none)

Each fifth-floor connection counted from the uppermost fixture drain must be reconciled against a complete floor/branch/parallel-stack drawing. Scalar yoke measurements do not establish this topology.

Island loop rise and above-floor trap — executable

909.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), islandTrapAboveFloor (none), islandVentAsHighAsPossible (none), islandLoopHeightIn (in), islandDrainboardHeightIn (in)

Island foot vent fittings, grade and cleanout — executable

909.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), islandReturnWyeImmediate (none), islandFootWyeBelowFloor (none), islandFootNearestPartition (none), islandDrainageFittingsBelowFloor (none), islandFootCleanoutAccessible (none), islandUpstreamOtherFixtures (none), islandFootSlopeInPerFt (in_per_ft), islandReturnBend (none)

Island return-loop and foot-vent connectivity — missing

909.1 / 904 / 1002: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none)

A conventional upward-only dry-vent graph cannot represent an island return loop. Bind loop, return, foot vent, trap and roof connection, and assess sizing before accepting the full method.

Circuit fixture count and outlet class — executable

911.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), circuitFixtureCount (count), circuitOutletClass (none), circuitTrapArmsHorizontal (none)

Circuit dry vent minimum and connection — executable

911.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), circuitVentBetweenUpperTraps (none), circuitVentReceivesWaste (none)

Circuit branch uniform maximum grade — executable

911.4: Maximum circuit grade only; Chapter 7 minimum slope and total-branch capacity must also be assessed.

Inputs: plumbingType (none), slopeInPerFt (in_per_ft), uniformTowardDisposal (none)

Circuit relief vent trigger and position — executable

911.3–3.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), waterClosetCount (count), circuitStackReceivesUpperWaste (none), circuitReliefDiameterIn (in), circuitReliefVerticalBetweenStackAndLastTrap (none)

Relief-vent fixture drain load — executable

911.3.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), circuitReliefReceivesWaste (none), circuitReliefOnlyOneTwoDfuFixtures (none), circuitReliefDfu (count)

Circuit whole-branch connectivity and sizing — missing

911.1–5 / Table 703.2 / Table 1002.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none)

Requires independently reconciled trap arms, circuit/relief connections, additional fixtures and parallel/continuous branch boundaries. Individual scalar checks do not validate a circuit-vent system.

Water sizing pressure budget — executable

608.2 / 610.2 / 610.7–8: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), availablePressurePsi (psi), designSourcePressurePsi (psi), minimumSourcePressurePsi (psi), elevationRiseFt (ft), elevationDropFt (ft), deviceLossPsi (psi), allDeviceLossesIncluded (none), pressureRegulatorPresent (none), regulatorSettingPsi (psi)

Water table sizing eligibility — executable

610.4 / 610.7–10 / Table 610.4: Table 610.4 only. Continuous demands need separate flow addition; parallel systems need listing/velocity design. Pressure between 45 and 46 psi requires review rather than silently selecting a band. Complete pressure-loss evidence and a reconciled fixture schedule remain necessary.

Inputs: plumbingType (none), availablePressurePsi (psi), meterDiameterIn (in), pipeDiameterIn (in), remoteOutletLengthFt (ft), continuousDemandPresent (none), parallelDistributionSystem (none), fixtureScheduleReconciled (none)

Water pipe and meter fixture-unit capacity — executable

Table 610.4 / 610.8–9: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), availablePressurePsi (psi), meterDiameterIn (in), pipeDiameterIn (in), remoteOutletLengthFt (ft), connectedWsfu (count)

Building water supply minimum diameter — executable

610.8(6) / Table 610.4 note 2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), pipeDiameterIn (in), waterPipeRole (none)

Water velocity, materials and terminal demand review — missing

610.12 / Appendix A: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none)

Table capacity does not establish non-copper material-specific velocity limits, terminal pressure/flow, thermal expansion or manufacturer/listing compliance. Supply those calculations and product data for the remaining design checks.

Horizontal wet-vent bathroom-group eligibility — executable

908.2 / 908.2.1 / 908.2.5: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), sameFloorBathroomGroup (none), onlyBathroomGroupOnBranch (none), dryVentedFixture (none), upstreamWetFixtureCount (count)

Horizontal wet-vent sizing band eligibility — executable

908.2.2: Published bands specify four or fewer and five or more DFU. Intermediate fractional loads require interpretation; do not silently assign the smaller diameter.

Inputs: plumbingType (none), connectedDfu (count)

Horizontal wet-vent minimum diameter — executable

908.2.2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), connectedDfu (count), pipeDiameterIn (in)

Wet-vent water-closet and additional-fixture connections — executable

908.2.4–5: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), waterClosetDownstream (none), additionalFixturesDownstreamAndVented (none)

Vertical wet-vent fixture and length limits — executable

908.1: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), wetFixtureCount (count), onlyOneTwoDfuFixtures (none), allWetFixturesSameStory (none), wetVentLengthFt (ft)

Vertical wet-vent section pipe-size increase — executable

908.1.1: Each section between consecutive inlet levels must be assessed separately with its upper fixture minimum waste and cumulative section load. This selected one/two-DFU, up-to-four-fixture path does not prove connected wet-vent topology.

Inputs: plumbingType (none), connectedDfu (count), upperFixtureMinimumWasteIn (in), pipeDiameterIn (in)

Wet-vent connected trap and dry-vent design — missing

908.1.1–2 / 908.2.1–3: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none)

Connect each actual trap arm and dry vent to its system and reconcile total loads, minimum dry-vent size, trap size, vent rise/takeoff and openings. Each vertical section must also pass its one-pipe-size increase calculation. Supplied system declarations alone do not prove connectivity.

Copper tube or copper-fitting water velocity — executable

610.12.1–2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), copperTubeOrFittings (none), waterTemperatureClass (none), designFlowGpm (gpm), minimumInternalDiameterIn (in)

Hot-water copper tube or copper-fitting velocity — executable

610.12.1–2: 2026 OPSC selected sizing and vent requirements. Confirmed project measurements and complete fixture schedules are required. A passing check does not validate the entire plumbing system.

Inputs: plumbingType (none), copperTubeOrFittings (none), waterTemperatureClass (none), designFlowGpm (gpm), minimumInternalDiameterIn (in)

Low-pressure nonwelded gas test specification — executable

C406.4.1: Selected published mechanical provisions only. Test specifications do not perform or witness a physical pressure test; full ventilation, equipment and fuel-gas design remain separate.

Inputs: mechanicalType (none), servicePressureInWc (in_wc), weldedPiping (none), lpNfpa54Path (none), testPressurePsi (psi), holdMinutes (minutes), noPerceptibleDrop (none)

Welded or higher-pressure gas test specification — executable

C406.4.1: Selected published mechanical provisions only. Test specifications do not perform or witness a physical pressure test; full ventilation, equipment and fuel-gas design remain separate.

Inputs: mechanicalType (none), servicePressureInWc (in_wc), weldedPiping (none), lpNfpa54Path (none), testPressurePsi (psi), holdMinutes (minutes)

Exactly 14 inches water column, nonwelded piping — missing

C406.4.1: Selected published mechanical provisions only. Test specifications do not perform or witness a physical pressure test; full ventilation, equipment and fuel-gas design remain separate.

Inputs: mechanicalType (none), servicePressureInWc (in_wc), weldedPiping (none), lpNfpa54Path (none)

Published errata specifies under 14 and exceeding 14 inches w.c.; exactly 14 for nonwelded piping needs authoritative clarification.

LP-gas alternative NFPA 54 path — missing

C406.4.1 exception: Selected published mechanical provisions only. Test specifications do not perform or witness a physical pressure test; full ventilation, equipment and fuel-gas design remain separate.

Inputs: mechanicalType (none), servicePressureInWc (in_wc), weldedPiping (none), lpNfpa54Path (none)

NFPA 54 testing, inspection and purging alternative has not been encoded; selecting it cannot pass the ordinary pressure-test rules.

Type I hood approved automatic suppression — missing

507.2.11: Selected published mechanical provisions only. Test specifications do not perform or witness a physical pressure test; full ventilation, equipment and fuel-gas design remain separate.

Inputs: mechanicalType (none)

An approved automatic fire suppression system complying with the Building Code is required. The errata deletes the obsolete 904.12 reference, not the suppression requirement; approval and full design cannot be inferred.

Portland dryer louver alternative — executable

BOD 19-08 conditions 1–6: Checks only the Portland BOD 19-08 louver alternative. All other OMSC requirements remain; alternatives failing these conditions require appeal rather than automatic rejection of the entire project.

Inputs: mechanicalType (none), portlandJurisdictionConfirmed (none), louverAtExteriorPlane (none), ventToLouverIn (in), louverSpacingIn (in), finAngleDegrees (degrees), backdraftDamper (none), multipleAdjacentVents (none), continuousVentSeparation (none), separationMatchesMaterialGauge (none), cleanoutAccessible (none), cleanoutLocationAndMethod (none), otherScreening (none)

Garage ventilation control performance — executable

E301.3(a) / 6.4.3.4.5: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), servedGarageSections (count), motorNameplateHp (hp), separateSectionSystems (none), automaticContaminantControl (none), minimumAirflowRatio (ratio), halfFlowPowerRatio (ratio)

Single-section small garage system exception — executable

E301.3(a) exception: Tests only the published exception to 6.4.3.4.5. The no-heating/no-cooling condition is deleted in Oregon. Section 404 and all other applicable mechanical requirements remain.

Inputs: energyType (none), servedGarageSections (count), motorNameplateHp (hp)

Garage ventilation mechanical-code dependency — missing

E301.3(a) / OMSC 404: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none)

OMSC 404 design, contaminant thresholds and commissioning are not fully encoded. Passing energy ratios or the small-system exception does not verify ventilation adequacy.

Overhead radiant occupied-area limit — executable

E301.3(e) / 6.5.8.3: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), spaceFloorAreaSqFt (sq_ft), spotHeatedAreaSqFt (sq_ft), overheadRadiant (none), enclosedUnconditionedSpace (none)

Radiant heating automatic controls — missing

E301.3(e) / 6.4.3.3.1(b),(c): Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none)

Automatic control requirements referenced in 6.4.3.3.1(b) or (c), space classification and complete base-code applicability need separate review.

Individual nontransient dwelling energy recovery — executable

E301.3(d) / 6.5.6.1.1: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), individualNontransientDwelling (none), requiredContinuousCfm (cfm), outdoorAirEnergyRecovery (none)

Ventilation sizing, performance and shared systems — missing

E301.3(d) / 6.5.6.1.1–2: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none)

The remaining base-section provisions, required-rate calculation and multi-unit systems need separate review. The amendment deletes the displayed 50% enthalpy sentence; it is not encoded as an active Oregon requirement.

Interior alteration without wattage increase — executable

E301.5(a) / 9.1.1.3.1(a): Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), existingWatts (watts), proposedWatts (watts), allowanceExceptionClaimed (none), createsNewSpace (none), altersControls (none)

Interior lighting alternative and control dependencies — missing

E301.5(a) / 9.1.1.3.1: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), existingWatts (watts), proposedWatts (watts), allowanceExceptionClaimed (none), createsNewSpace (none), altersControls (none)

New spaces, altered controls and allowance alternatives require the referenced ASHRAE sections and tables, not just a before/after wattage comparison.

Exterior alteration wattage and retained controls — executable

E301.5(a) / 9.1.1.3.2: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), existingWatts (watts), proposedWatts (watts), allowanceExceptionClaimed (none), controlsAtLeastExisting (none)

Exterior area-specific lighting allowance — missing

E301.5(a) / 9.1.1.3.2 exception: Selected Oregon modifications only, for buildings under the OSSC. Base ASHRAE 90.1 scope, exceptions, design and commissioning remain separate. Recorded specifications do not verify installed performance.

Inputs: energyType (none), existingWatts (watts), proposedWatts (watts), allowanceExceptionClaimed (none)

Table 9.4.2-2 area-specific allowances must be validated without using base-site allowances; this table path is not yet encoded.

Plan calculations

Connected water demand

Table 610.3 / 610.9–11: Recomputes fixture supply units and flushometer demand for every pipe in a confirmed supply tree. Applies hose-bibb aggregation, selected separate hot/cold reductions and fixture branch minima. Continuous demand stays in gpm and blocks the current WSFU-only sizing path. Unlisted uses and clinical flushometer classification require review.

Vertical drainage runs

703.1–2 / Table 703.2: Confirmed vertical segments carry downstream loads and full contiguous run height. Segment splitting cannot reset length limits. Offset-stack interpretation and complete high-rise relief topology remain unresolved.

Connected ordinary dry vents

901.2 / 904 / 905: Binds each fixture to its trap route and drain connection, checks connected vent paths, rise before offset or convergence, gravity return and undiminished diameters. Accumulates loads and lengths; counts distinct unobstructed terminal areas once. Supplied sewer sizing, actual internal diameters and complete inventory require independent verification. Wet, island and circuit methods are separate paths.

Classified drainage fixture loads

Table 702.1 / Table 703.2 note 7: Private, public and assembly DFU values accumulate through confirmed drainage networks. Public-lavatory branch reduction is applied only to qualifying branches. Missing use classifications, shower head counts or washer context block calculation. Reconciled washer batteries apply six DFU per washer on common pipes while individual drains remain three. Flow schedules support Table 702.2 intermittent and 702.3 continuous loads; intermittent discharge above 50 gpm requires determination. Septic sizing and unlisted classifications remain outside this calculator.

Connected pipe route lengths

904.1–2 / 1002.2: Validated supplied segments accumulate developed trap-arm and vent lengths, including fitting allowances. The tool checks connectivity, dimensions and current-sheet references; it does not independently discover pipe routes in drawings.

Adopted code programs and remaining coverage

Reviewed 2026-11-01. Residential construction edition selection is separate from mandatory 2026 administration. Available code text is not equivalent to implemented review.

2026 ORSC: not-implemented

Integrated codebook and amendment summary described as forthcoming by BCD; complete 2024 IRC dependencies also required.

2023 ORSC: partial

Bounded source-linked provisions only; full base-code, amendments, referenced standards and exceptions remain unreconciled.

2026 ORSC Chapter 1: inventory-only

Source available. Administration, discretionary approvals and records workflow not fully implemented.

2025 OSSC: not-implemented

Full structural/occupancy/accessibility review, errata and referenced standards not encoded.

2025 OEESC / ASHRAE 90.1-2022: partial

Selected Oregon energy amendments implemented; full ASHRAE construction standard and energy-model validation remain.

2026 OESC / 2026 NEC: partial

NFPA codebook requires an account; full base standard and Oregon amendment reconciliation required.

2025 OMSC: partial

Selected errata and Portland dryer-louver alternative implemented; full base code, equipment data and sizing/ventilation review remain.

2026 OPSC / 2024 UPC: partial

Integrated official text is accessible. Selected 2026 checks implemented; full section reconciliation, system topology and sizing remain unfinished engineering.

2010 OMDISC: not-implemented

Installation standards and project-specific manufacturer instructions not encoded.

2002 OMD&P, including 2005 amendments: not-implemented

Park standards and amendments not encoded.

Find a section reference

1492 matching references. Showing the first 50.

33.100.010 — indexed reference; no full implementation claim
33.100.020 — indexed reference; no full implementation claim
33.100.030 — indexed reference; no full implementation claim
33.100.040 — indexed reference; no full implementation claim
33.100.100 — indexed reference; no full implementation claim
33.100.110 — indexed reference; no full implementation claim
33.100.200 — indexed reference; no full implementation claim
33.100.205 — indexed reference; no full implementation claim
33.100.210 — indexed reference; no full implementation claim
33.100.220 — indexed reference; no full implementation claim
33.100.225 — indexed reference; no full implementation claim
33.100.230 — indexed reference; no full implementation claim
33.100.240 — indexed reference; no full implementation claim
33.110.010 — indexed reference; no full implementation claim
33.110.020 — indexed reference; no full implementation claim
33.110.030 — indexed reference; no full implementation claim
33.110.050 — indexed reference; no full implementation claim
33.110.100 — indexed reference; no full implementation claim
33.110.110 — indexed reference; no full implementation claim
33.110.200 — indexed reference; no full implementation claim
33.110.202 — indexed reference; no full implementation claim
33.110.205 — indexed reference; no full implementation claim
33.110.210 — indexed reference; no full implementation claim
33.110.215 — indexed reference; no full implementation claim
33.110.220 — indexed reference; no full implementation claim
33.110.225 — indexed reference; no full implementation claim
33.110.227 — indexed reference; no full implementation claim
33.110.230 — indexed reference; no full implementation claim
33.110.235 — indexed reference; no full implementation claim
33.110.240 — indexed reference; no full implementation claim
33.110.245 — indexed reference; no full implementation claim
33.110.250 — indexed reference; no full implementation claim
33.110.255 — indexed reference; no full implementation claim
33.110.260 — indexed reference; no full implementation claim
33.110.263 — indexed reference; no full implementation claim
33.110.265 — indexed reference; no full implementation claim
33.110.270 — indexed reference; no full implementation claim
33.110.275 — indexed reference; no full implementation claim
33.110.280 — indexed reference; no full implementation claim
33.110.285 — indexed reference; no full implementation claim
33.110.290 — indexed reference; no full implementation claim
33.110.292 — indexed reference; no full implementation claim
33.110.295 — indexed reference; no full implementation claim
33.110.296 — indexed reference; no full implementation claim
33.120.010 — indexed reference; no full implementation claim
33.120.020 — indexed reference; no full implementation claim
33.120.030 — indexed reference; no full implementation claim
33.120.040 — indexed reference; no full implementation claim
33.120.050 — indexed reference; no full implementation claim
33.120.100 — indexed reference; no full implementation claim